Constructing a Floating Drum Biogas Digester Part 4

Constructing a Floating Drum Biogas Digester Part 4

Step by Step Guide to Constructing a Floating Drum Biogas Digester by Plastic 1000 letter and 1500 letter water tank

Make ½”  (12.5mm)hole  in the TOP of  the gas holder  tank. The hole  should be near the EDGE of the tank

13.5 mm gas fittings

Fit the male adapter to the   inside of gas holder tank

Add caption

Filling the tank/starting up the system

Place clean  bricks in the  bottom of the  DIGESTER  tank to support the GAS HOLDER tank and the INLET PIPE

Fill the DIGESTER tank
according to  the
START UP instructions

Biogas plant digester

After filling the DIGESTER tank, place the GAS HOLDER tank inside the DIGESTER

biogas digester