AutoCAD orthographic Views:
Steps in drawing orthographic views from pictorial views:
1. Study the given pictorial sketch or object carefully following the principles of orthographic projection
2. Prepare sketches of the required orthographic views from the picture or object or model before scale drawing is started
3. Make a preliminary measuring and determine the space required for the chosen combination of views
4. Select a suitable scale if necessary
5. Space the views and block out the spaces for the views
6. Draw centre lines of symmetrical parts like cylinder and centres of circles if visible
7.
Build up the details in each view starting with the most
characteristics shape and then proceeding to minor details. Carry the
views along together and do not attempt to finish one view before taking
up another. Keep the construction lines minimum and draw the lines to
finished thickness, if possible.
Note: it
is not possible to draw the top and side views directly. The depth
measurements are relocated from one point to the other point. Mitre
lines is sometimes used to transfer the measurements. Mitre line is a 45
degree line drawn through the points of intersection of the top and
side views of the front edge. Use of a mitre line is not recommended
since it takes more time and requires great care.
8. Check whether all the hidden features are shown in the drawing by dashed lines
9. Erase the extra construction lines after drawing the required views
10. Complete the dimensioning including the titles and notes
11. Check the drawing for accuracy and ascertain that it is complete in all respects.
Orthographic Drawing Practice 1:
Isometric To Orthographic Drawing Exercises Answer 1:
Orthographic Drawing Practice 2:
Isometric To Orthographic Drawing Exercises Answer 2:
Orthographic Drawing Practice 3:
Isometric To Orthographic Drawing Exercises Answer 3:
No comments:
Post a Comment