Moulding Sand | Silica Sand | Foundry Sand - LEKULE BLOG


Home Top Ad

Responsive Ads Here

Post Top Ad

Responsive Ads Here

Thursday, 31 December 2015

Moulding Sand | Silica Sand | Foundry Sand

Moulding Sands:
Most sand casting operations use Silica sand (SiO2). Usually sand used to manufacture a mould for the casting process is held together by a mixture of water and clay. A typical mixture by volume could be 89% sand, 4% water, 7% clay. Control of all aspects of the properties of sand is crucial when manufacturing parts by sand casting.

01-make sand casting-sand casting with sand-sand casting green sand

Characteristics of Moulding Sand:

Important characteristics are:

1. These sands are refractory in nature and can withstand temperature of the metal being poured, without fusing.

2. The moulding sands do not chemically react or combine with molten metal and can therefore be used repeatedly.

3. The sands have a high degree of permeability and thus allow the gases formed during pouring to escape.

4. The strength, permeability and hardness of the sand mix can be varied by changing the structure or ingredients of sand.

01-strike-strike off bar-strip of wood

Properties of moulding sands:

The important properties are:

1. Strength

2. Permeability

3. Grain Size and Shape

4. Thermal stability

5. Refractoriness

6. Flow ability

7. Sand Texture

8. Collapsibility

9. Adhesiveness

10. Reusability

11. Easy of preparation and control

12. Conductivity

01-vent wire-molding tool
Post a Comment
My photo

Hi, I`m Sostenes, Electrical Technician and PLC`S Programmer.
Everyday I`m exploring the world of Electrical to find better solution for Automation. I believe everyday can become a Electrician with the right learning materials.
My goal with BLOG is to help you learn Electrical.

Post Bottom Ad

Responsive Ads Here